Free Delivery
Over £60 Ex VAT
Shop
All Categories
Filter
BEP 720 Heavy Duty Battery Isolator Switch – 600A Cont., 48V Max
In Stock
- 600A continuous, 2500A cranking for heavy-duty use.
- Recess or surface mountable with Contour locking system.
- Ignition protected, removable back cover to prevent shorting.
- Self-cleaning sliding contacts for long-lasting performance.
£62.99
BEP 770 Pro Installer 400A On/Off Battery Switch
In Stock
- 400A continuous, 1500A cranking for reliable performance.
- Can be surface, rear panel, or front panel mounted.
- UV stabilized, fibre reinforced plastics for marine environments.
- IP66 rated, UL1107 ignition protection, and CE marked.
- Suitable for 12-48V DC systems.
£50.49
BEP 770-EZPro-Installer EZ-Mount Battery Switch (400A / On/Off)
In Stock
The Pro-Installer EZ Mount battery switches make installation both quick and easy. Upward facing studs on the switch base allow direct access to cable connections. The front actuator knob and facia can then be fitted at any 90 degree rotated position to suit the cable runs in and out of the switch. These switches can also be used with Pro-Installer link bars to create cluster configurations to other Pro-Installer products. 770-EZ switch with On/Off operation and 2 x 10mm (3/8") studs.
£44.99
BEP 771-S Pro Installer 400A Selector Battery Switch – MC10
In Stock
- 400A continuous, suitable for modern boat power requirements.
- Accommodates doubled cables and fits industry standard footprints (Guest, Perko, Blue Sea).
- Offers reliable battery selection for enhanced power management.
- Engineered for marine environments with strong materials.
- The 771-S Pro Installer replaces the 721 model for improved performance.
£56.88
BEP 771-S-EZ Pro Installer 400A EZ-Mount Battery Selector Switch (1-2-Both-Off)
In Stock
- Optimized cable access for quick, compact installations with shared interconnection height.
- 400A continuous, 600A intermittent, 1500A cranking for reliable performance.
- Fibre reinforced plastics, tinned copper studs, and stainless steel washers/nuts.
- IP66 rating, ignition protection (UL1107), and removable side plates for safety.
- Industry-standard 3.85" x 3.85" size for easy integration.
Original price was: £55.20.£41.00Current price is: £41.00.
BEP 772 DBC-EZ Pro Installer 400A EZ-Mount Dual Bank Control Battery Switch
In Stock
- Combines House, Start, and Emergency Parallel positions for easy control.
- Isolates engine during servicing while providing power to house loads.
- 400A continuous, 1500A cranking, with 600A intermittent performance.
- IP67 rating, tinned copper studs, and fibre reinforced plastics.
- Easy surface mounting, shared interconnection height with Pro Installer Busbar Range.
£66.00
BEP 772-DBC Pro Installer Dual Battery Bank Control Switch
In Stock
- Efficient power management for dual battery systems on boats.
- 400A continuous, 1500A cranking, with 600A intermittent performance.
- IP67 rated, tinned copper studs, stainless steel washers, and fibre reinforced plastics.
- Surface mountable with a standard 3.85 x 3.85-inch footprint.
- Tested for UL1107 ignition protection, load sealing, and rotation force.
Original price was: £62.40.£48.00Current price is: £48.00. Each
BEP 777-BB3S-650 – Busbar HD 3 Stud 650A MC5
In Stock
- Compact footprint saves space
- Clear, polycarbonate covers insulate and protect on three sides
- Secure cover attachment does not interfere with cabling
- Snap-out skirts for flexible cable entry
- Radiused ends improve cable routing
- Long, threaded studs to connect up to (4) large cable lugs
£45.19
BEP 777-BB4S-500 Pro Installer HD 4 Stud Bus Bar
In Stock
- 4 Stud-500A busbar: 8mm (5/16") stainless steel studs
- 3 5 and 8 stud-650A busbars: 10mm (3/8") stainless steel studs
- 50 VDC
- Tinned CDA102 Copper conductors
- Stainless steel studs washers nuts for longevity in the marine environment
- Generous stud lengths metric threads
£41.22
BEP 777-BB5S-650 BEP Pro-Installer Busbar HD 5 Stud 650A
In Stock
- 5 stud-650A busbars: 10mm (3/8") stainless steel studs
- 50 VDC
- Tinned CDA102 Copper conductors
- Stainless steel studs washers nuts for longevity in the marine environment
- Generous stud lengths metric threads
£75.34
BEP 777-BB8S-650 BEP Pro-Installer Busbar HD 8 Stud 650A
In Stock
- 8 stud-650A busbars: 10mm (3/8") stainless steel studs
- 50 VDC
- Tinned CDA102 Copper conductors
- Stainless steel studs washers nuts for longevity in the marine environment
- Generous stud lengths metric threads
£100.99
BEP 777-Z18W-200-B 18W BUS BAR 4 STUD
In Stock
- 4 x 6mm (1/4") studs with anti-seize lubricant
- 4mm (5/32") terminals with captive lock washers
- 200A maximum per bar (2 x 200A)
- 50V DC
- Tinned CDA102 Copper Conductors
- Stainless steel studs, washers, nuts for longevity in the marine environment
- Metric threads
£25.20
BEP 778-ANL BEP Pro-Installer Fuse Holder ANL 300A
In Stock
- High-capacity protection (35-300A) for onboard power electronics, inverters, and battery chargers.
- Easy fuse replacement with swinging fuse style and compatibility with 8mm or 10mm ANL fuses.
- Durable construction ensures maximum load handling and superior short circuit protection.
£14.68
BEP 778-ANL2S ANL Fuse Holder with 2 Additional Studs, 750A
In Stock
- High-capacity fusing with fast response and high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), ideal for onboard power electronics like inverters and battery chargers.
- Durable construction supports maximum load handling, ensuring reliable protection for wiring from short circuits.
- Radiused ends improve cable routing options for more flexible installation.
- Fuse compatibility: Fits 5/16" (8mm) or 3/8" (10mm) ANL fuses, with surface mount options up to 750A and a patent-pending 750A through-bulkhead mount holder.
£33.04
BEP 778-T2S-400 Pro-Installer Class-T Fuse Holder 225- 400A
In Stock
- Designed for use with Class-T fuses ranging from 225A to 400A, providing ultimate protection for high-power circuits and fast fuse blow characteristics.
- Features tinned copper conductors, stainless steel hardware, and a clear polycarbonate cover to protect fuse connections in marine environments.
- Voltage rating of 50V DC and a 400A max current rating, with 10mm (3/8") M10 studs for both fuse and cable lug mounting.
- The fuse holder has overall dimensions of 146mm (L) x 48mm (W) x 60mm (H), with a black glass-reinforced nylon base for durability.
£32.99
BEP ANL Fuse 100 Amp
In Stock
- 100A ANL Fuse designed for high-current wiring system protection in marine environments.
- Corrosion-resistant, ignition protected, and tin-plated for durability in harsh conditions.
- Visible fuse status window for easy inspection and monitoring.
- 6000A interrupt capacity with a maximum voltage of 32V DC, using 3/8" (10mm) stud.
£10.49
Apply for a Trade Account
Enhance your shopping experience with Marine Electricals. Unlock discounted pricing and seamless ordering by applying for our exclusive Trade Account today!